Cortelco Colleague Telephone User Manual


 
CONFERENCE BUTTON
1. To establish a three-way conference call, press HOLD while talking on one line.
The first conference person is on Hold, the HOLD LED will light.
2. Press Line 1 or Line 2 whichever is not being used. Listen for dial tone. Dial the
telephone number of the second person.
3. Press the conference button. You may now speak to the first and second per
son simultaneously. To place both calls on hold, press the hold button while in confer
ence. To cancel hold for one line, press the desired line.
Note: The first person is automatically released from hold after pressing the con
ference button.
4. Replace the handset in the cradle to disconnect both lines. To stay connected to
only one line, press the desired line. The other line will be disconnected.
5. After conference call, press Line 1 or Line 2 to cancel conference call.
TONE BUTTON (*)
If the PULSE/TONE switch is set to the PULSE position, and you want to make a tone
dialing call after pulse dialing, press the TONE button on the dialing keypad, then
dial the number. The number dialed out will be changed to tone dialing automatically
without setting the PULSE/TONE to TONE position.
HEADSET COMPATIBLE
The slide switch must be located in the proper position for this feature to work. The
headset can be turned on and off by using the handsfree button.
Note: Use the Slide Switch located on the right side of the phone base to set On or Off.
CONTRAST BUTTON
The preset value is 3. you can change it to your preference by pressing CONTRAST
button to adjust to different levels of the display contrast.
DATA PORT
This is a connection which is in parallel with the telephone line. It allows the
connection of a device such as a modem, caller ID, or an answering machine. The
data port is across line 2.
USING THE DIRECTORY
This unit stores the numbers of up to 99 of your business associates, clients, contacts,
and friends in your Directory. You can dial these numbers by selecting them.
Names are sorted alphabetically starting with the first character. (If you want your
Directory sorted by the last name, enter the last name first.)
13