Filter
Top Products
9
6. You have now completed the necessary programming.TOTAL:00 NEW:00”
appears in the display. This is the initial standby screen. The Date/Time is set
when a Caller ID call is received. This telephone will keep the current time accu
rately, and is updated each time a CID number is received. After you have set up
the unit completely for the first time, use the OPTIONS button to review or repro
gram the Language, Area Code, Flash Timer, Line Status or Dial Mode.
USING YOUR TELEPHONE
RECEIVING A PHONE CALL
1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the callers information shows on the display window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKER-
PHONE button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be inter
rupted by the phone ringing.
PLACING A PHONE CALL
1. Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the
display window.