Filter
Top Products
SPEAKERPHONE BUTTON
1. Receiving Incoming Calls
a. When the phone rings and the caller’s information shows on the display
window (refer to Using the Caller ID Function), press and release the
Speakerphone button and talk normally into the built-in microphone from a
distance of 5-6 inches.
b. You can adjust the volume of the caller’s voice by pressing the VOLUME
button to obtain the desired volume level.
c. After the conversation has finished, press the SPEAKERPHONE button to
hang up.
2. To Make A Call
a. Press and release the SPEAKERPHONE button.
b. When you hear a dial tone, dial the number or press the auto memory
button just as you would on any other push-button telephone. The
number appears on the display window.
c. After the conversation has finished, press SPEAKERPHONE to hang up.
Note:
1. If you wish to switch from handsfree to handset, simply lift the handset.
2. If you wish to switch from handset to handsfree, press and release
SPEAKERPHONE and then hang up the handset.
DURATION COUNTER
A built-in counter will start counting for your reference 6 seconds after you lift the
handset or 6 seconds after you dial a telephone number.
AUTOMATIC MEMORY
To Store A Number In Memory: (Telephone must be on-hook)
1. Press and hold the SAVE button for more than 2 seconds. [SAVE TO?]
appears display window.
2. Press the key (located on right-hand side of base) you want to store the
number. Then [ENTER NUMBER] appears on the display window.
3. Enter the number you want to store. After you complete the number, press the
SAVE button. Then [ENTER NAME] appears on the display window. Use
the keypad to input the name associated with the number. (See page 15 for
instructions.)
4. Press the SAVE button again.
10