Filter
Top Products
a-2 Tips and Troubleshooting
NOTE: Do not turn off your iPAQ as it must remain on in order to reset.
Clearing memory
If you want to clear all data from your iPAQ H3000 and return it to the factory settings,
you should clear the memory.
1. Using the stylus, slide open the On/Off door on the base of the iPAQ H3000.
2. Slide the On /Off switch to the Off position using the stylus. Wait about one minute,
then slide the switch to the On position.
Clearing memory deletes all data and restores the iPAQ H3000 to its default set-
tings. Programs installed at the factory remain, while data you have created and
programs you have installed are erased.