Vertical Communications EP100 Telephone User Manual


 
Other Advanced Features
86 Comdial Sept ‘04
When outside callers call into a system that has both a Tracker Paging
option and a voice mail option installed, the system gives these callers
the option of either leaving a message or tracking the person that they
are calling.
To track a called party after receiving a ring—no answer,
1. Make an intercom call to some-
one and receive no answer.
2. Select TRACK.
3. Hear confirmation beep (Tracker
page accepted) or hear busy tone
(Tracker page not accepted).
4. Press SPEAKER to end.
To track a called party without first
calling them,
1. Press INTERCOM and dial *8.
2. Dial extension number.
3. Hear confirmation beep (Tracker page accepted) or hear busy
tone (Tracker page not accepted).
4. Press SPEAKER to end.
To use Tracker to transfer a call to a park orbit for retrieval and
transmit the call’s park orbit code and caller ID information (if
available),
1. Answer call and select TRANS.
2. Dial extension number.
3. If the called station does not answer or is busy, select TRACK.
4. Hear confirmation beep (Tracker page accepted) or hear busy
tone (Tracker page not accepted).
5. Press SPEAKER button to end.
To retrieve a call that you parked using the Tracker option,
1. Press HOLD button to scroll your held calls, (display shows
PAGE and extension number of each parked call).
C
alling J Smith
CALLBK
MSG
TRACK
Initiating a Tracker Page