Vertical Communications EP100 Telephone User Manual


 
Making Calls
40 Comdial Sept ‘04
3.2 Making Intercom Calls
There are two methods for making an intercom call. One causes the
called telephone to ring (tone-first). The other causes your voice to
sound out at the called telephone (voice-first). Your installer can set
the system to deliver either tone-first or voice-first calling.
Note: The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To manually cause the other telephone
to ring (tone calling),
1. Press INTERCOM.
2. Dial extension number (called
telephone will ring).
To tone call automatically, press DSS/
BLF button (called telephone will ring).
Note: The following instructions assume a voice-first default setting.
Any user can change a call to a tone signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To voice announce manually,
1. Press INTERCOM.
2. Dial extension number.
3. Speak your announcement.
To voice announce automatically,
1. Press DSS/BLF button.
2. Speak your announcement.
Ext 321 J Doe
Press Intercom to Display
Extension Number
C
alling J Smith
CALLBK
MSG
Ringing Intercom