Filter
Top Products
50
English
Advanced Operation
Operating Your Radio
A
A
Memory Location Scan
Memory Location Scan Mode
During Memory Location Scan mode, the radio will rapidly
scan through all pre-assigned memory channels. Whenever
any activity is detected on a channel, the radio will stop the
scan for 10 seconds to allow you to listen briefly on that
channel. It will then continue to scan unless you switch out
of Memory Location Scan mode.
NOTE
The radio must be squelched for Memory Location
Scan mode to function. See page 31 for Squelch
procedure.
NOTE
If there are fewer than two (2) memory locations
programmed in the radio, the Memory Location Scan
option will not be available. To program at least two
(2) memory locations, see page 47.
MRHH415EU-Body.qxp:400_Body 12/15/06 10:01 AM Page 50