Filter
Top Products
25
Nothing Comes Close to a Cobra
®
Antenna, Wrist Strap
and Belt Clip
Antenna, Wrist Strap and Belt Clip
•
Antenna Installation
The flexible antenna is shipped separately in the package
and must be attached before you use the radio.
1. Align the base of the antenna with the socket in the
top of the radio.
2. Screw it all the way into the socket. Be sure that
the seal seats properly.
NOTICE
Operating the radio without the antenna in place
may damage the unit. The radio is not waterproof
until the antenna and battery pack are in place
with their seals properly seated.
Wrist Strap
The radio comes with the wrist strap already attached.
It can be easily removed if you choose not to use it.
Belt Clip
Use the spring-loaded belt clip to carry the radio on your
person.
1. Press open the belt clip, slide it over the belt and
release the clip.
2. Insert the round guide on the back of the radio into the
guide channel on the back of the belt clip. The radio must
be upside-down, as shown, to remove it from the belt
clip.
3. Once the knob is inserted all the way into the belt clip
channel, the radio swings free but remains secure.
Install Antenna
Wrist Strap
Belt Clip Secured to Belt
Insert Knob onto Belt Clip
Secure Radio
Installation
MRHH415EU-Body.qxp:400_Body 12/15/06 10:00 AM Page 25