Cobra Electronics MR HH415LI VP EU Two-Way Radio User Manual


 
45
Nothing Comes Close to a Cobra
®
Advanced Operation
Operating Your Radio
Tri-Watch Mode
Tri-Watch mode gives you one (1) button access to scan a
total of three (3) channels of most importance to you. Channel
16 is preprogrammed and will always be one (1) of the
scanned locations. Two (2) other channels of your choice can
be stored in the radio. These channels can be edited and/or
recalled during future engagements of Tri-Watch mode.
NOTE
The radio must be squelched for Tri-Watch mode to
function. See page 31 for Squelch procedure.
Tri-Watch Setup
To Program or Edit the Tri-Watch Channels:
1. Press and hold the TRI-WATCH button for two (2)
seconds to activate Tri-Watch Setup mode. The TRI
and MEM icons on the display will turn On.
NOTE
The main channel number will flash to indicate channel
position. If there is no input activity for 15 seconds, the
radio will sound two (2) beeps and return to Marine
Standby mode.
2. Press Channel Up/Down button to select the desired
Tri-Watch channel.
3. Press and release TRI-WATCH button or
Call/Enter/Setup button to confirm entry.
4. Repeat steps 2 and 3 to program the remaining
additional Tri-Watch memory channel.
5. After programming both Tri-Watch memory channels
the radio will immediately engage Tri-Watch mode.
(See page 46 for further details.)
PRESET
TRI-WATCH Button
TRI and MEM Icons
Channel Up/Down Button
MRHH415EU-Body.qxp:400_Body 12/15/06 10:00 AM Page 45