Filter
Top Products
16 17
Message window displays
See the table below for other message window displays.
0
There are no messages in the answering system.
0
(ashing)
After a power failure, the number in the message
window ashes to indicate the date and time need to be
set.
0-6
Telephone base ringer volume while adjusting.
1-8
Speaker volume level of the telephone base while
adjusting.
1-99
• Total number of messages and memos.
• Current message number during old message
playback.
1-99
(ashing)
• Total number of new messages and memos. The
number ashes when there are new messages that
have not been reviewed.
• Current message number during new message
playback.
• After a power failure, the number in the message
window ashes to indicate the date and time need to
be set.
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new
messages can be recorded.
--
• The answering system is being programmed by a
system handset.
• The answering system is deleting all old messages.
• The answering system is answering a call or recording
a memo or announcement.
• The answering system is being accessed remotely.
The screen display gives you information on the current status of the
telephone.
The speakerphone is turned on.
While reviewing the call list history, missed calls that
have not been reviewed.
The ringer is switched off.
New message in the answering system.
Answering system is turned on.
New voicemail received from the telephone service
provider (network subscription is required).
The audio boost feature is on.
The microphone is muted.
2/3 battery power level.
1/3 battery power level.
BASE OVERVIEW
HANDSET SCREEN ICONS