Filter
Top Products
TROUBLESHOOTING
62
• Make sure you have selected the correct dialing mode,
tone or pulse.
• Make sure the AC Adapter is not plugged into a wall
outlet with other appliances. Disconnect for 5-10
seconds then reconnect. Place the handset back on the
base and reinser t the AC Adapter.
• Make sure the handset batter y is fully charged.
Your handset screen is showing Out of Range
• Move closer to the base.
• Place the handset into the base until the screen
displays: “Handset Registered.” It will take
approximately 5-10 seconds for the handset to register
to the base.
• Handset may need to be re-registered to the base
manually. First, select INITIAL SETUP on the main
menu. Second, select REGISTRATION on the
sub-menu. The screen will then display “Please hold the
page button until beep.” This will register your
handset to the base. The screen will then display the
handset number.