Filter
Top Products
Wireless-G IP Phone
38
Chapter 4: Configuring the Wireless-G IP Phone
Tools
Tools
Use the Tools menu to view information about your IP Phone and network status. Refer to the sections below for the options available in the Tools menu.
Option Description
Signal Quality View signal status information for the wireless access point you’re connected to.
Site Survey Perform a site survey of all the wireless access points in range of the IP Phone.
Statistics View the IP Phone’s network and codec statistics. Press the Select Soft Key to select from the
following options:
• IP Statistics: Allows you to view network packets statistics.
• RTP/RTCP: Allows you to view Real-Time Transport Protocol (RTP) and Real Time Control Protocol
(RTCP) statistics.
• Encoding: Allows you to view encoding statistics.
• Decoding: Allows you to view decoding statistics.
Battery View the IP Phone’s battery status.
Ping Ping an IP address or domain.
Version View the IP Phone’s software version information.
Upgrade Upgrade the IP Phone’s firmware.
Back to Default Reset all of the IP Phone’s settings back to their factory defaults.
Restart Soft reset the IP Phone.