Filter
Top Products
Wireless-G IP Phone
36
Chapter 4: Configuring the Wireless-G IP Phone
Sound Settings
Sound Settings
The Sound Settings menu allows you to change the IP Phone’s speaker volume, ringer settings, and warning tones. Refer to the table below for a list of
options available in the Sound Setting menu.
Display Settings
The Display Settings menu allows you to customize the IP Phone’s display. Refer to the table below for a list of options available in the Display Settings menu.
Option Description
Speaker Volume Set the IP Phone’s speaker volume.
Ring Tone Set the IP Phone’s ring tone and volume. Press the Select Soft Key to select from the following
options.
• Melody: Allows you to set the IP Phone’s ring tone.
• Ring Volume: Allows you to adjust the IP Phone’s ringer volume.
Ring Mode Set the IP Phone’s ring mode to Silent, Ring, Vibrate, or Ring + Vibrate.
Warning Tone Enable or disable the IP Phone’s warning tones, such as low battery.
Option Description
Wallpaper Change the picture displayed on the home screen.
Greeting Change the message displayed on the home screen.
LCD Off Time Change the amount of time it takes for the IP Phone to turn off its LCD when the phone is not in use.
LCD Brightness Change the brightness of the LCD screen.
Config. Tip Enable or disable configuration tips.