Filter
Top Products
23
Parking a call
Step 1 During an active call, press the Menu button.
Step 2 Select Call Functions and press the Select button.
Step 3 Select Park and then press the Select button.
The display shows the number to which the call is parked.
Step 4 Make a note of the Call Park number. The call is now parked at that number, allowing you to
retrieve it from another phone.
Note You have a limited amount of time to retrieve the parked call before it reverts to
ringing at its original destination. Contact your system administrator for the time
limit information.
Step 5 To retrieve the parked call from any phone in the Cisco CallManager system, dial the Call
Park number at which the call was parked.
Call Pickup
The IP Conference Station allows you to answer a call that comes in on a telephone extension other
than on your IP
Conference Station. When you hear an incoming call ringing on another phone, you
can redirect the call to your IP Conference Station by using the call pickup feature.
There are two types of call pickup available on the IP Conference Station:
• Call Pickup—pick up incoming calls within your own group. The appropriate call pickup group
number is dialed automatically when you choose this feature.
• Group Call Pickup—pick up incoming calls within your own group or in other groups. You must
dial the appropriate call pickup group number when using this feature.
These features are only available if your system administrator configured your IP Conference Station
to support them. The IP
Conference Station does not support these features by default.