Filter
Top Products
10
Follow these steps to install and connect the IP Conference Station to the network.
Step 1 Place the IP Conference Station on a flat surface, for example, a conference room table or
desktop.
Step 2 Connect one end of the 6 ft. CAT 5 cable to your data network port and connect the other
end to the network (LAN) port on the PIM.
Step 3 Connect the free end of the 25 ft. CAT 5 cable to the RJ-45 port on the bottom of the
IP
Conference Station. (The cable is pre-plugged into the PIM.)
Step 4 Connect the Power Supply unit to the AC adapter port on the PIM, and plug the other end
into a standard electrical power outlet in the wall.
Note If you do not correctly connect the cables, PIM, power supply, and the
IP
Conference Station unit, the IP Conference Station will not work.
Use of non-Cisco certified components may not work and may void the
IP Conference Station product warranty.
Startup Sequence
During the startup sequence, the LCD screen display shows the following messages.
Sequence Step LCD Screen Message Display
Startup Cisco Systems, Inc.
Polycom Technology
Copyright 2001
IP Address configuration Renewing/Obtaining IP Address
Loading Application
Configuring IP
Press Menu to Reconfigure
Cisco CallManager configuration Station IP (IP address)
Contacting (IP address)