Filter
Top Products
22
Establishing a Meet Me conference
Step 1 Press the Phone button.
Step 2 Press the Menu button.
Step 3 Select Call Functions and then select Meet Me.
Step 4 Dial the Meet Me conference number.
Step 5 Follow the voice instructions to establish the Meet Me conference.
Joining a Meet Me conference
• Dial the Meet Me conference number provided by the Meet Me conference coordinator.
You are connected to the conference once the conference initiator has dialed in and established the
conference.
Call Transfer
To Transfer a call
Step 1 While on a call, press the Transfer softkey.
This places the call on hold.
Step 2 Dial the number to which you want to transfer the call.
Step 3 When you hear ringing, press the Transfer softkey again, or when the party answers, announce
the call and then press the Transfer softkey.
Note If the call fails to transfer, press the Resume softkey to return to the original call.
Call Park
The IP Conference Station allows you to store or “park” a call at a specified number and then use any
other phone in the Cisco
CallManager system (for example, a phone in someone else’s office or in a
conference room) to retrieve the call. Call Park numbers are configured by the system administrator.