Filter
Top Products
40-49
Cisco CallManager System Guide
OL-7135-01
Chapter 40 Cisco IP Phones
Phone Configuration Checklist
Step 5
Configure Cisco IP Phone services.
You can configure services for Cisco IP Phone models
7970, 7960, 7940, 7912, 7905, and Cisco IP
Communicator if you want to provide services for users
or if you are configuring phones that do not have a
specific user who is assigned to them. Users can change
the services on their phones by using the Cisco IP Phone
User Options.
Configuring Cisco IP Phones,
Cisco CallManager
Administration Guide
Step 6
Customize phone button templates and softkey templates,
if required. Configure templates for each phone.
Adding Phone Button
Templates, Cisco CallManager
Administration Guide
Configuring Cisco IP Phones,
Cisco CallManager
Administration Guide
Adding Nonstandard Softkey
Templates, Cisco CallManager
Administration Guide
Step 7
Assign services to phone buttons, if required. Adding a Cisco IP Phone
Service to a Phone Button,
Cisco CallManager
Administration Guide
Step 8
Provide power, install, verify network connectivity, and
configure network settings for the Cisco IP Phone.
Cisco IP Phone Administration
Guide for Cisco CallManager
Step 9
Associate user with the phone (if required). Associating Devices to a User,
Cisco CallManager
Administration Guide
Step 10
Make calls with the Cisco IP Phone. Refer to the user guide for your
Cisco IP Phone.
Table 40-6 Phone Configuration Checklist (continued)
Configuration Steps Procedures and Related Topics