Cisco Systems 301 IP Phone User Manual


 
Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 51
3
To unpark if you know the park line number:
STEP 1 Press the unpark softkey.
STEP 2 Enter the number of the park line (for example, the number that was entered in
Step 2 of “parking a call.”)
STEP 3 Press dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
STEP 1 Press the Setup button.
STEP 2 Scroll to Call Park Status and press the select softkey.
STEP 3 Choose the parked call you want to retrieve and press unpark.
Placing a Three-Way Conference Call
Cisco SPA 301
To initiate a conference call:
STEP 1 During an active call, press the Flash button. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the Flash button again. All three parties are connected in the conference call.
NOTE When you hang up, the other two parties are disconnected.
Cisco SPA 303
To initiate a conference call:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.