Filter
Top Products
Using Basic Phone Functions
Placing or Answering a Call
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 38
3
Adjusting the Ringer Volume
Cisco SPA 301
To adjust the ringer volume, press the Vol. button when the handset is on the
phone. When the ringer volume reaches the maximum, the next button press
reduces the volume to the minimum.
Cisco SPA 303
To adjust the ringer volume, press the Volume button when the handset is on the
phone and the speaker button is off. Press save.
Using Mute (Cisco SPA 303)
To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button glows red. Press the Mute button again to unmute.
If no audio device is on, pressing the Mute key has no effect. When switching from
the speaker phone to the handset, mute is turned off automatically.
Placing or Answering a Call
NOTE You may have to dial a number or numbers to reach an outside line. Ask your phone
administrator.
Basic techniques to answer a call:
• Pick up the handset.
• Press the Speaker button (Cisco SPA 303).
• Press the Headset button (Cisco SPA 303).
• Press a green line button to place a call or a red flashing line button to answer a
call (Cisco SPA 303).
Techniques to place a call without dialing a number (Cisco SPA 303):
• Press the redial softkey, then the dial softkey to dial the last number.
• If you have configured speed dials, press the assigned speed dial code and
then press the dial softkey.