Filter
Top Products
5-16
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 5 Parameters and Defaults
SIP Parameters
SIPRegOn
Description
0—Disable SIP registration.
1—Enable SIP registration. When this flag is enabled, the Cisco ATA registers with the SIP Proxy Server
that is specified in the GkorProxy parameter. The Cisco ATA also registers with the interval that is
specified in the SIPRegInterval parameter.
Value Type
Boolean
Range
0 or 1
Default
0
Voice Configuration Menu Access Code
204
NATIP
Description
This is the WAN address of the attached router/NAT; currently only used to support SIP behind a NAT.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
200