Filter
Top Products
5-7
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 5 Parameters and Defaults
Network Parameters
• StaticRoute, page 5-7
• StaticNetMask, page 5-8
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
• 1—Enable DHCP
• 0—Disable DHCP
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
20
StaticIp
Description
Use this parameter to statically assign the Cisco ATA IP address if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
1
StaticRoute
Description
Use this parameter to statically assign the Cisco ATA route if the DHCP parameter is set to 0.
Value Type
IP address