Filter
Top Products
5-32
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Chapter 5 Parameters and Defaults
Operating Parameters
Voice Configuration Menu Access Code
917
UDPTOS
Description
This parameter specifies the IP precedence (ToS bit) of UDP packets. Set the lower eight bits only, as
follows:
• Bits 0-1: Unused
• Bit 2: Reliability bit—1=request high reliability
• Bit 3: Throughput bit—1=request high throughput
• Bit 4: Delay bit—1=request low delay
• Bits 5-7: Specify datagram precedence. Values range from 0 (normal precedence) to 7 (network
control).
Value Type
Bitmap
Default
0xB8
Voice Configuration Menu Access Code
255
SigTimer
Description
This parameter controls various timeout values. Table 5-5 on page 5-33 contains bit definitions of this
parameter.
Value Type
Bitmap
Default
0x01418564
Voice Configuration Menu Access Code
318