Filter
Top Products
To adjust the handset ringer volume
The handset ringer can be set to LOW, HI or OFF.
• Press the ➔ button several times until display
shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows LEVEL.
• Press the ➔ button several times until the
display shows RING VOL.
• Press the ✔ button. Display shows the current
setting HI (LOW or OFF).
• Press the ➔ to change the setting. Display
shows LOW (HI or OFF).
• Press the ✔ button. A beep confirms that the
change has been made.
To adjust the handset ringer melody
You can select from six different ringer
melodies.
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows LEVEL.
13
To adjust the dial delay
The dial delay is the time taken by the phone to
send a number to the exchange after dialling.
The dial delay can be set to short, medium or
long. The factory setting is medium.
• Press the ➔ button several times until display
shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ➔ button. Display shows BASE.
• Press the ✔ button. Display shows
SECURITY PIN.
• Press the ➔ button several times until the
display shows DIAL DELAY.
• Press the ✔ button. Display shows current
setting (SHORT, MED, or LONG).
• Press the ➔ button to change the setting.
• Press the ✔ button. A beep confirms that the
change has been made.
Optional settings
If you stop any procedure before it is completed,
your Synergy handset will revert to standby after
20 seconds.
If you select OFF as the handset ringer setting
the screen will show SILENT.