Filter
Top Products
Before inserting the back-up battery you
must ensure that your unit is connected
to the mains power.
BT recommends that you insert an
alkaline PP3 9V battery (not supplied) to
provide up to 6 hours back-up. This will
ensure messages are saved in the event
of power failure.
4 Insert the back-up battery
Response 15+ - Edition 5 – 26th October ’00
5
Plan the location of your
Response 15 Plus
Situate your Response 15 Plus close
enough to the phone and mains power
sockets so that both cables will reach.
Setting up
Follow these steps to set up your Response 15 Plus ready for use
If you do not have a modern phone
socket, call Freephone 0800 800 150
and ask for a BT engineer to come and
fit the correct socket. This is a
chargeable service.
TELEPHONE
USE ONLY APPROVED
9V DC ADAPTOR
1 Check your telephone
wall socket
2. Plug the mains power cord
into the back of the machine
The display will flash for 20 seconds.
It will then show the normal ‘no messages’
display. The display will flash slowly until
any button is pressed.
3 Plug the adaptor into
a mains power socket