BT Response 15+ Answering Machine User Manual


 
Press
+
to increase the
volume.
Press to decrease the
volume.
As you press, a beep sounds
at the level you are selecting.
When the volume is at its
highest or lowest level you will
hear 2 beeps.
Response 15+ - Edition 5 – 26th October ’00
8
Using your Response 15 Plus
You can adjust the volume of
your outgoing message,
incoming message, memos
and voice prompts.
There are 8 levels to choose
from. The default level is
mid-range.
Answering machine controls
To adjust the loudspeaker
volume
Please note
If you alter the volume during playback
of a message, the beep does not sound but
the volume will change accordingly.
If the volume is set to below mid-volume,
it will automatically return to the mid-
volume setting when any buttons are
pressed (for example, if a message is
played back). The volume is unaffected
during remote access or call screening.
Press buttons in the order shown.
Press and release the Answer
on/off
button. Your Response 15
Plus will announce ‘Answer off.’
When off, the display shows
a single dash.
Press and release the
Answer
on/off
button again. Your
Response 15 Plus will
announce Answer on.
When on, the display shows
the number of messsages
received e.g 5.
To switch the answering
machine on and off
Answer
on/off
Answer
on/off
Volume
+
Volume
Your Response 15 Plus will
announce the day and time an
incoming message or memo
was recorded.
To check the day and time
Press and release the Delete
button. Your Response 15 Plus
announces the day and time in
hours and minutes.
To set the day and time
Delete