Filter
Top Products
Still pressing the Delete button,
press either the Skip
ᮣ
button
or the
ᮤ
Skip button to move
forwards or backwards through
the minutes. When you hear
the correct minute, release the
Delete button.
Your Response 15 Plus will
announce the new day and
time setting and then return
automatically to ‘answer on’
mode.
Response 15+ - Edition 5 – 26th October ’00
9
The outgoing message is the message
a caller hears when your Response 15
Plus answers a call.
Your Response 15 Plus comes with a
pre-recorded outgoing message. ‘Hello,
your call cannot be taken at the moment,
so please leave your message after the tone’.
You can use this outgoing message or
you may prefer to record your own.
To hear the outgoing message press the
Stop button.
Outgoing message (OGM)
To set the day
Press and hold the Delete
button. Your Response 15 Plus
will announce the current day.
Still pressing the Delete button,
press either the Skip
ᮣ
button
or the
ᮤ
Skip button to move
forwards or backwards
through the days of the week.
When you hear the correct
day, release the Delete button.
Your Response 15 Plus will
announce the day you have set.
To set the hour
Press and hold the Delete button
again. Your Response 15 Plus
will announce the hour
currently set.
Still pressing the Delete button,
press either the Skip
ᮣ
button
or the
ᮤ
Skip button to move
forwards or backwards through
the hours.
When you hear the correct hour,
release the Delete button. Your
Response 15 Plus will announce
the hour you have set.
To set the minute
Press and hold the Delete button
again. Your Response 15 Plus
will announce the minute
currently set.
Please note
The time on your Response 15 Plus is
announced using the 12-hour clock.
Be sure to hold down the
ᮤ
or
ᮣ
buttons
long enough for your machine to say
whether it is am or pm.
Delete
Skip
ᮣ
ᮤ
Skip
Skip
ᮣ
ᮤ
Skip
Delete
Skip
ᮣ
ᮤ
Skip
Please note
Your Response 15 Plus has a total
recording capacity of 18 minutes. Any
outgoing message you record can be up
to 2 minutes long, but you should keep it
short to allow more time for recording
incoming calls.
Delete