Filter
Top Products
Response 15+ - Edition 5 – 26th October ’00
14
Remote access
You can switch on and operate your Response 15 Plus from another
TouchTone phone to play back your messages and memos
To help keep your messages private,
your Response 15 Plus requires you
to enter a 2-digit Security Code before
you can play back your messages.
For your security code, look at the swing
out label on the underside of the machine.
(You cannot change the security code).
This is useful if you forgot
to switch on your answering
machine before going out.
KEYPAD
Ring your Response 15 Plus
phone number. After 20 rings
your Response 15 Plus will
answer. When you hang-up,
the answering machine will be
switched on and will answer
calls.
To switch your Response 15
Plus on
Dial your Response 15 Plus
phone number.
When you hear your outgoing
KEYPAD
message, press the ✱ button.
You will hear 2 beeps.
The message counter on your
Response 15 Plus will flash ‘
A’.
KEYPAD
Key in the first digit of your
security code (within 8
seconds).
KEYPAD
Key in the second digit of your
security code.
Your security code
To check for messages
Please note
You will hear 4 short beeps if you have
entered the wrong security code
and are invited to enter the code again.
Do not re-enter
✱.
You are allowed 2 attempts.
If you take more than 8 seconds to enter
a number, the Response 15 Plus will
announce ‘Thank you for calling’ and
disconnect the line.
If you have no messages, you
will hear… ‘You have no
messages. Thank you for calling.’
… and your Response 15 Plus
will disconnect the line.
If you have messages you will
hear… ‘You have x messages’.
Your Response 15 Plus will
then play your messages, with
the day and time they were
recorded.