Filter
Top Products
Click De-register.
Enter the system code for the base
(default =
0000
).
Click OK.
Once de-registered, the screen
displays the BT On-Air Monitor
window. The base is removed from
the list.
You must now register to a new base
to connect to the Internet via your
BT On-Air.
Click Close to close the Monitor
screen.
If you see a message saying
de-registration was unsuccessful,
see Help “General check”, page 49.
You can deregister your USB unit
from the base.
Click the BT On-Air icon in the
system tray to open the Monitor.
46
Note
Registration information is stored in the
BT On-Air USB unit. If you install it on
another computer, this computer will be able
to access all the BT On-Air 1800 bases to
which your BT On-Air USB unit is registered.
Note
If you have registered your BT On-Air USB
unit with more than one base, and move
from one to another while not connected
to the Internet, the modem will log on the
base automatically.
If you move out of range of a base while still
connected to the Internet, the connection will
be broken.
Note
A warning message will appear if registration
failed. Check that:
– the base is switched on and set-up correctly
– the BT On-Air USB unit is plugged into a
USB port on your computer.
– the correct system code is entered.
– the USB unit is not already registered.
Your computer may be too close to the base.
See Help, page 48.
➜
➜
➜
➜
1
1
2
To deregister a BT On-Air USB unit