Filter
Top Products
If you have changed the base's system
code from the default
0000
or if your
handset is registered to a base and you
also want to register it to another base,
you must use Custom Registration.
At the base:
Press and hold down the
ᮤ
Skip button
until the PLAY button starts to flash.
On the handset:
Press the OK button.
Press the 9 button.
Use the UP or DOWN button to select
the base number (this number is
shown as the RFPI on the underside of
the base).
Press the OK button.
Enter the System Code.
Wait until the available handset
numbers appear. ie.
456
. Then press
the handset number you want.
43
If you purchase new handsets to use with your
current BT On-Air 1800, they will not be
pre-registered to a base station. You will need
to do this before you can use them.
Registering additional
handsets
This automatically registers the new
base as Base 1 and will replace any
existing Base 1 registration.
If you have already changed the base’s
System Code from the default 0000,
you will need to follow the instructions
below for Custom Registration.
At the base:-
Press and hold down the
ᮤ
Skip button
until the PLAY button starts to flash.
On the handset:-
Press the OK button.
Press the 6 button.
The handset will now automatically
register with the handset number.
COK
6
M
N
O
ᮤ
S
k
i
p
Note
The instructions for registration and
de-registration in the following pages are
for BT On-Air Classic handsets. If you have
purchased another model, refer to your
handset’s user guide.
COK
9
W
X
Y
Z
▲
▼
ᮤ
S
k
i
p
COK
CODE
Quick registration
(if you have not changed the
System Code from 0000)
Custom registration
(if you have changed the
System Code from 0000)