Filter
Top Products
21
The BT On-Air screen is displayed.
1. Base stations
Base Name displays the bases your BT On-Air
USB unit is registered to. It can be registered
to a maximum of four bases.
Status shows: e.g. with two bases registered.
•
Not logged on
– your computer cannot use
the base (e.g. it is out of range).
•
Logged on
– Your computer is ready to
connect to the Internet. The internal number
allocated by the base to the BT On-Air USB
unit is displayed (e.g. Logged on as n؇ 3).
6 Close
Note
Your BT On-Air USB unit can only log-on to
one base at a time.
2. Adjusting the settings
You must be in range and connected to the base
to adjust the settings of that base. The buttons
are not active when your computer and USB
unit are out of range.
You can rename the current base, change the
system code and de-register the BT On-Air
USB unit from the current base. For
de-registration, see page 44.
5 About
BT On-Air
1 Base
stations
4 Register
to base
2 Adjusting the
settings
3 Signal
Quality