Filter
Top Products
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
Manual upgrade
If new software is available and you selected to upgrade
later, you can manually upgrade the software at any time
using the handset menu.
1. Press
Menu to access the menu.
2. Press or to scroll and display
HANDSET
and
press
OK .
3. Press or until
HANDSET SOFTWARE
is displayed
and press
OK .
4.
CHECK SOFTWARE
is displayed, press OK to confirm.
5. As requested, place the handset on the charger linked to
the hub. The display shows
UPGRADING
. When the
upgrade is complete,
UPGRADE SUCCESSFUL
is displayed
and the handset resets and automatically re-connects to
the base.
While the handset is being
updated, the update cannot be
cancelled. If the user takes out the
handset from the cradle, the
update is interrupted. If the user
puts it back within 90 seconds,
the update will resume and will be
completed correctly. If the user
doesn’t put it back within 90
seconds, then the handset is
unusable and the user needs to
use the rescue mode from the
hub, see page 65.
Software upgrades64
If you try to upgrade using the
menu and the reminder was not
displayed when in standby, it
means that there is no upgrade
available. You will see the message
NO UPGRADE AVAILABLE
.
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 64