Filter
Top Products
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
If the other handset does not answer, press INT to talk to
the caller again.
Selecting a base to use
If your handset has been registered to more than one
base you can select which one it uses. Alternatively, you
can select
AUTOMATIC
and the handset will automatically
select and use the base nearest to you.
1. Press
Menu to access the menu.
2. Press or to scroll and display
REGISTRATION
and
press
OK .
3. Press or until
SELECT BASE
is displayed and press
OK .
4. Press or to select the base number you want to
use or
AUTOMATIC
and press OK .
As the handset links up with the selected base,
BASE
SEARCH X
.
5. Press
OK to confirm and
BASE X SELECTED
is
displayed, then the handset returns to standby.
The base numbers that your
handset is registered to are
indicated by the
*
symbol.
X is the number of the selected
base.
If the handset loses the link (goes
out of range) with the base, you
can select
AUTOMATIC
on the
handset to automatically link to
the nearest registered base.
Using additional handsets 61
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 61