Filter
Top Products
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
2. Press or to scroll and display
REGISTRATION
and
press
OK .
3.
REGISTER HANDSET
is displayed, press OK to select.
4.
BASE 1
is displayed. Press or to select the base
number you want to register to and press
OK .
5.
SYSTEM PIN
is displayed. Enter the PIN code using the
keypad and press
OK to confirm and begin
registration.
6.
BASE SEARCH X
is displayed (where X is the base
number). When registration is successful
HANDSET
REGISTERED
is displayed. Press OK to return to
standby.
The handset will automatically be allocated the next
available handset number which will be displayed when in
standby mode.
If your handset is already registered
to a base, the
*
symbol will be
shown to the right of the base
number.
If there are already 5 handsets
registered to the base you will hear
a double beep.
Each digit of the PIN code will be
displayed as a
*
for security
reasons.
Press
Clear if you enter an
incorrect digit.
If you enter the wrong PIN code
you will hear a double beep.
If registration fails, the handset will
return to standby mode and you
will need to repeat the registration
procedure and try a different base
number.
Using additional handsets58
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 58