Filter
Top Products
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
46
To set your handset to priority
base station selection
This setting tells your handset
to search for a specified base
signal for 30 seconds. If the
signal cannot be found, the
handset reverts to automatic
selection of the base with the
best signal. This setting is
recommended where there is
an overlap between two or
three base stations.
Press the
SET button.
Press the
INT button.
Enter the priority base station
number twice, eg. 1, 1.
Press the
OK ( ) button.
Press the
RED PHONE button
to return to standby.
To set your handset to
automatic base selection
Your handset is pre-set to
automatic base selection.
If you are moving around, and
likely to lose contact with your
base station, your handset can
be made to automatically
switch to the best available
base station. This means that if
you are in an area where the
signals of two base stations
overlap, your handset will
select the strongest signal.
Press the
SET button.
Press the
INT button.
Press
0 to set automatic base
selection.
Press the
OK ( ) button.
Press the
RED PHONE button
to return to standby.
INT
0
Note
Please note that you cannot move
between base stations whilst a call is in
progress. If you attempt to do so, you
will lose your connection.
INT
1
1
MULTIPLE
Note
This procedure may vary if you are
linking to a Diverse 2-Line or Diverse
ISDN. Please refer to the user guides
for these base stations for the correct
procedure.
Diverse 3010 User Guide 22/3/01 1:34 pm Page 46