Filter
Top Products
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
1 Connect the power cable
Plug the power cable into the power
socket on the underside of your
Diverse 3010 Classic. Take care that
the telephone line cord and power
cable plugs are connected to the
correct sockets. Incorrect placement
could damage the station.
9
Follow these steps to get your
Diverse 3010 Classic ready for use.
Note
Plan where you will put your Diverse
3010 Classic. It should be within two
metres of a power socket and the
phone socket.
Note
Use only the power adaptor
C39 280-Z4-C174/..–C67 with your
Diverse 3010 Classic.
2 Plug the 3 pin adaptor
into a mains power socket
and switch on
3 Install the rechargeable
batteries in the handset
The handset uses the two AA size nickel
cadmium (NiCad) batteries, which are
supplied. To install them, insert the
batteries as indicated on the inside of the
battery compartment (or in the picture
on the next page) and slide the battery
compartment cover shut.
Your handset is already “registered”
to the Diverse 3010 Classic base
station.
Red socket
Setting up
SETTING UP
Diverse 3010 User Guide 22/3/01 1:33 pm Page 9