Filter
Top Products
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
Press the RED PHONE button
to return to standby.
27
To change the handset PIN
The PIN on your handset
protects functions and settings
from unauthorised access.
A handset PIN is necessary in
order to:
– reset the memory
– reset to the original settings.
Handset power must be
switched to ON.
Press the
SET button.
Press the
1 then the 2 buttons.
Press the
OK ( ) button.
Display shows
12 PIN
_ _ _ _
Enter the current handset PIN
(original setting
0000
).
Press the
OK ( ) button.
Enter the new four digit PIN.
Enter the new PIN again.
Press the
OK ( ) button to
confirm. You hear a
confirmation beep. The new
PIN is stored.
Note
You can press the RED PHONE button
at any time during these steps to quit
the procedure.
1
2
ABC
KEYPAD
KEYPAD
KEYPAD
Caution
Do not forget your base station PIN
or handset PIN. Special, expert help
is required if you forget the PIN code.
Please contact the Diverse Helpline
on 08457 908070. Calls are charged
at local rates. You may write down
the base station PIN code and your
handset PIN in the space provided in
the front of this book. Note that these
numbers should be kept safe.
To switch the telephone
handset lock on and off
You can prevent an individual
handset from being used to
make all calls except for 999
emergency services.
You can still receive incoming
calls. When the phone rings,
press the
GREEN PHONE
button as normal.
Press the
SET button.
Press the
1 button.
Press the
1 button again.
Press the
OK ( ) button.
Enter the handset PIN
(original setting
0000
).
1
1
KEYPAD
SECURITY
Diverse 3010 User Guide 22/3/01 1:33 pm Page 27