BT Diverse 2010 Cordless Telephone User Manual


 
26
To register a handset
The handset must be switched OFF.
At the base station:
• Press and hold down the grey paging
button until you hear the continuous
beeps (after about 10-15 seconds).
At the handset:
• Press and hold down the 1 button
together with the PWR button until
the display shows 1–and flashing .
• Enter the 4 digit system code
(default 0000).
• Press the # button. The beeps stop
after about 10 seconds, and the display
shows all the available handset
numbers.
• Select and enter one of these numbers.
This is now the handset’s internal
number and it is registered with the
base station.
Registering a new Diverse
2000 Additional Handset
with the base station
1
PWR
#
Up to six handsets can be registered
and operated from the Diverse 2010
base station. The system allows you to
make internal intercom calls between
two handsets while a third is making an
external call.
Each additional handset you purchase
must be registered at the base station.
Diverse 2000 Handsets are only
compatible with Diverse 2000 Chargers.
You now have up to 1 minute to register
the handset, during which the beeps will
continue.
Diverse handsets Item Code
Diverse 2000
Additional Handset 871171.
Diverse 2000
Executive Handset 871172.
Diverse 2000 Charger 871173.
Please note – Diverse 2000
handsets will not work on Diverse
1000 base stations.
If you are registering a Diverse 2000
Executive Handset follow the instructions
in the Diverse 2000 Executive Handset
user guide.