Filter
Top Products
21
4. Secrecy
You can use the Diverse 2010 to place
your caller on hold so that they cannot
hear you talking.
To obtain secrecy on an external call
• Press the INT button. Display shows
your handset’s internal number and
you hear the internal dial tone. This
allows you to talk to someone in the
same room, without your caller
hearing the conversation. Instead,
they hear a tune.
• Press the RCL button to resume your
telephone call with the external party.
Secrecy is not available for internal calls.
INT
RCL
5. Call allocation
If you have registered additional
handsets with your Diverse 2010 base
station you can specify the way you wish
the phones to ring.
Group ringing
Your Diverse 2010 will ring all handsets
registered to its base whenever there
is an incoming call. This is called group
ringing.
Ring priority
Your Diverse 2010 can be set so that an
incoming call will ring first at a preferred
handset. If there is no answer, the call will
revert to all other handsets. This is
called ring priority.
Your Diverse 2010 is preset for group
ringing.
To change between ring priority and
group ringing
The handset must be switched ON.
• Press the STO button.
• Press the
#
button.
• Press the 1 button.
• Enter the system code.
(Standard setting is 0000.)
• Press the LNR button.
• Press the ✱ button.
• Press the 2 and then the 3 button.
Display shows current setting.
• Press the 2 button to select
RING PRIORITY.
Or
• Press the
1 button to select
GROUP RINGING.
• Press the STO button to confirm.
STO
LNR
✱
2
ABC
3
DEF
#
1