Filter
Top Products
20
To reset your Diverse 2010 base station
to the original settings
This will reset:
– TONE/PULSE signalling to TONE.
– Access code/pause to NONE.
– Pause after the RCL key to NONE.
– Ring assignment to group ringing.
It will also delete any new settings
made for: connections to a switchboard.
This will NOT reset:
– The system code.
– Handset registration settings.
With the handset switched ON.
• Press the STO button.
• Press the
#
button.
• Press the 1 button.
• Enter the system code.
(Standard setting is 0000.)
• Press the LNR button.
• Enter the code 2, 5, 0.
• Press the STO button to confirm.
To reset your Diverse 2010 handset
to the original settings
This will reset:
– Ringer volume.
– Tone.
– Battery warning tone.
– Range warning tone.
– In-range tone.
– Automatic call acceptance.
– Confirmation tones.
It will delete:
– Numbers stored in the speed
dialling memory.
– The last number redial memory.
This will not reset:
– The handset PIN.
– The handset registration.
With the handset switched ON.
• Press the STO button.
• Press 8 on the keypad.
• Press the MEM button.
• Press the handset PIN code.
(Standard setting is 0000.)
• Press the STO button.
STO
LNR
2
ABC
5
JKL
0
#
1
STO
MEM
If you are experiencing problems, please
call the Diverse Helpline on
0345 908070.
8
TUV