Filter
Top Products
13
To put an outside caller on hold and
speak to another internal handset
• Press the INT button. You hear the
internal dial tone and your outside
caller is put on hold. Your caller will
hear ‘music on-hold’.
• Press the handset number you want,
1-6. When the handset answers, you
can talk without your outside caller
hearing.
• Press the RCL button to end the
internal call and speak to your outside
caller.
To transfer an external call between
handsets
If you are in a conversation with an
outside caller and want to transfer the
call to another handset.
• Press the INT button. Display shows
EXT INT plus your handset number.
The caller hears a tune.
• Enter the number of the handset to
which you wish to transfer the call.
When the handset is answered, you
can talk to the other handset without
the outside caller hearing.
• To reconnect to your outside caller:
Press the RCL button.
Or
• To transfer the call press the END
CALL
button, or replace your handset
on its base.
INT
RCL
Quick call transfer
After dialling the other handset, you can
immediately press the END CALL button,
or replace the handset on the base and the
call will be transferred straight through.
If the other handset is already engaged, or
does not answer the call within 30 seconds,
the call will be returned to your handset.
Please note: If you go out of range of a
base station for a long time while your
handset is switched ON, it may take more
than 20 minutes to ‘find’ the base station
again when you come back within range.
However, by simply switching the handset
OFF for a moment, then ON again, it will
find the base station within a few seconds.
INT
RCL
1
6
MNO