Filter
Top Products
32
• Call appears to have been cut off
after pressing the
SECRECY button.
You may have pressed a number key
on the handset after pressing the
SECRECY button. The current handset
will try to transfer the call to another
handset.
Wait 30 seconds; the call will return
to the current handset. Or press the
TALK button and the call will return
immediately.
• No number stored on 1471.
Stored number may have
inadvertently been overwritten.
Press the QUICKDIAL button, press
the relevant Select Services button,
then press the
QUICKDIAL button
again. This will reset the button.
• No Quickdial store.
You may be trying to store the
number with the
IN USE light on.
Ensure that the
IN USE light is off
before storing the number.
• BATT LOW light on the handset
is flashing.
The handset needs recharging. Replace the handset on the base unit,
ensuring that the base unit is plugged
in and that the
CHARGING light is on.
• No CHARGING light on the
base unit.
Dirty contacts on base unit or
handset.
Clean the contacts with a dry cloth.
Heavy soiling can be removed with a
pencil eraser.
HELP
Telephone problems Possible cause Solution