Filter
Top Products
NOTE
Your additional handset must be placed on the base
unit within 5 seconds of the IN USE light flashing.
NOTE
Your Freestyle additional handset is pre-set
to handset number 2.
NOTE
Make a note of the identification number by writing
it on the handset’s directory label.
NOTE
Check that your additional handset is registered
correctly by pressing the TALK button and listening
for a dial tone. If you do not hear a dial tone your
additional handset is either out of range of the base
unit or it has not been registered properly, or the base
unit line cord is not plugged in.
To re-register an additional handset
Before re-registering, the old
registration code must first be erased.
If necessary you can re-register your
additional handset by simply following
the above procedures.
To set a handset identity number
Press the QUICKDIAL button.
Press the
SECRECY button.
KEYPAD
Enter the identification number (2-4)
using the keypad.
When you have entered the number,
press the
QUICKDIAL button.
You will hear a beep confirming that
the new number has been stored.
To set the handset number
Each additional handset must be
assigned an identity number (2, 3 or 4).
Your Freestyle 1025 handset is already
numbered as HANDSET1. Additional
handsets can then be numbered as they
are added.
Quickdial
Quickdial
Secrecy
ADDITIONAL HANDSETS
28