BT 4500 Cordless Telephone User Manual


 
42
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
If registration is not successful rst
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.
Registering additional
handsets
You can use up to ve BT Studio 4500 handsets with your
BT Studio 4500 base to extend your phone system without
needing to install extension sockets for each new phone.
If you have purchased a BT Studio 4500 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Studio 4500 base before it can be used.
Registering a handset
1. Press the button then
or
until regiSTraTiOn
is displayed, then press
.
2.
Pin? is displayed. Enter the base PIN (original setting 0000)
and press
.
3. The handset will display
Searching, press and hold the
button on the base until you hear a long beep and the green
In use light begins to ash.
4. The handset will temporarily display
regiSTereD then will
display
hanDSeT and will be automatically assigned the next
handset number.