Filter
Top Products
15
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Call timer
Your handset automatically displays
the duration of every external call.
The call time will remain on the
display until 5 seconds after the call
has ended.
Press Right soft key
to
delete an incorrect digit when
preparatory dialling.
If you have subscribed to a Caller
Display service, your caller’s number
will also be shown. If the number
is withheld the display will show
WiThhelD. If an exact number match
is found in the Phonebook, the name
will alternate with the number in
the display. See page 29 for more
information.
Internal calls
When you receive an internal call, the
calling handset number will be shown
on the handset display.
If two handsets are engaged on an
internal call and an external incoming
call is received, beeps will be emitted
at both internal handsets. The
internal call has to be ended before
the external call can be answered.
Using the phone
Switch the handset on/off
1. Press and hold
for 5 seconds to switch the handset on
and off.
Make a call
1. Press .
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on the
display before you dial out. The display can only show 12 digits at
a time, if you enter a number with more than 12 digits,
will be
displayed to the left of the number to indicate more digits.
1. Enter the number rst then press
to dial.
End a call
1. Press
or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will ring and
the
icon will ash. The In use light on the base will also ash.
1. If the handset is not in the base/charger, press
to answer
the call.
Or
If the handset is on the base/charger, lift the handset to
answer the call.
2. To turn the handset ringer off when receiving a call press the
Right soft key
. The display will briey show VOlUMe OFF.