Binatone SC2050 Telephone User Manual


 
To use your cordless handset and base unit (part of the
base telephone) together, you must be able to establish a
radio link between them. Be aware that:
any large metal objects, like a refrigerator, a mirror,
filing cabinet etc, between the handset and the base
unit may block the radio signal.
other solid structures, like walls, may reduce the
signal strength.
Radio signals
between
handset and
base unit
8
If the sound quality gets worse as you move around
while on a call, this is probably caused by interference
between the cordless handset and the base unit, perhaps
because you are too near to another phone or other
electrical equipment.
Move to a different position to clear the interference. If
you do not move, it might cause a short break or your
call may be cut off.
If you hear a warning tone during a call on your cordless
handset, and the sound in the earpiece becomes faint or
distorted, you may be going out of range of the base unit.
Move nearer to the base unit within 20 seconds, until the
warning tone stops. Otherwise, your call may be cut off.
IMPORTANT - the Big Button Combo base telephone
and charger pod must be used with the mains adapters
supplied with them. Using any other adapter will result
in non-compliance with EN60950, and will invalidate
any approval given to this.
Interference
“Out of range”
warning
Mains power
connection
do not reconnect the base station. Follow the same
procedure for your handset after removing the internal
batteries.
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, televisions etc.
it is away from hot, humid conditions and strong
sunlight.
The base telephone can be wall mounted if you prefer,
using the template supplied.