Binatone SC2050 Telephone User Manual


 
Note:
Battery life depends on device usage. Therefore, it is recommended that
you read the following.
When the batteries are low, the cordless handset will display the
corresponding icon
. Place the handset back on the charger pod:
the battery icon
will start scrolling.
Use only original batteries and charge them only on the charger pod.
Insert the battery pack properly as previously described.
Do not dispose of the batteries in fire: this may cause an explosion.
Do not expose the batteries to temperatures lower than -20 °C or
higher than 60 °C; charge and use the batteries only in locations
where the temperature is between 0 °C and 40 °C.
Remove the battery pack from the compartment if the cordless
handset is not used for a long period of time.
11
Installation and set-up
Binatone Help Line: 0845 345 9677
55
55
5
Charge the battery pack for 15 hours before you use the cordless
handset
Before you use the handset for the first time, it is important that you
charge the batteries fully. You will hear a ‘beep’ when the handset is
correctly positioned on the charging cradle.
Leave the handset on the charger pod for
15 hours. To keep the batteries charged,
whenever you don’t need to use the
cordless handset (such as overnight, or
when you go out), leave it on the charger
pod.
The CHARGE
light comes on