Filter
Top Products
13
BASE TELEPHONE Making and answering calls
It is possible to deactivate the microphone
during a conversation so you can speak without
being heard by the other person on the call.
Press the MUTE button once
While the mouthpiece is muted and the
handset is off hook or while the microphone is
muted in speakerphone mode, the
SPEAKERPHONE light flashes.
To get back to the call:
Press the MUTE button again
To mute the
mouthpiece
or
microphone
To adjust the volume in the handset’s earpiece
or the loudspeaker in speakerphone mode:
Press the VOLUME +/– buttons
To adjust the
volume
To adjust the volume of the base telephone’s
ringer. In idle mode (not busy on a call):
1 Press and hold the VOL-/SET RINGER VOLUME
button to hear the current ring volume
2 Press the VOLUME +/– buttons to set your
desired ring loudness
If there is no key pressed within 3 seconds,
the function leaves the programming mode and
the new ring volume will be saved automatically.
Remark: In case the volume level was initially
set to “OFF”, the base phone will still playback
the volume 1 ringer when user tries to program
the ringer volume again.
Ringer
volume
To change the base telephone’s ringer melody,
while the phone is idle (not busy on a call):
1 Press and hold the VOL+/SET RINGER
MELODY button to hear the current melody
2 Press the VOLUME +/– buttons to set your
desired ring melody
If there is no key pressed within 3 secs, the
function leaves the programming mode and the
new ring melody will be saved automatically.
Ringer
melody