Filter
Top Products
Caller ID System Operation
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
25
J. Deleting Message Waiting Indication
1. Press and hold the button to enter the menu.
2. Press the button to go to the MESSAGE WAITING programming option.
3. Press the button to reset the Message Waiting Indication. “DEL” will
begin flashing.
4. Press the /re/pa button to delete the indication. A long “beep” will sound
to confirm the setting has been saved.
5. Continue with programming or press the /MENU button to return to
STANDBY mode.
K. Setting the Area Code
1. Press and hold the button to enter the menu.
2. Press the button to go to the AREA CODE programming option.
3. Press the button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD to buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Press the button to return to STANDBY mode.
NOTE:
To use the call back function, press the /option button and then select the
10-DIGIT DIALING mode. Press the button and the unit will automatically dial
the stored 7-digit number plus the area code.
*
VOICE MAIL
#
voice mail/menu
voice mail/menu
voice mail/menu
voice mail/menu
talk
save
oper 0
flash/edit
save
flash/edit
1
oper 0