Filter
Top Products
Caller ID System Operation
E. Adjusting the Contrast
1. Press and hold the button to enter the menu.
2. Press the button to go to the CONTRAST programming option.
3. Press the button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of
contrast.
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
F. Setting the PBX Number
1. Press and hold the button to enter the menu.
2. Press the button to go to the PBX NUMBER programming option.
3. Press the button to change the setting. “OFF” will begin flashing.
4. Press the SCROLL UP or DOWN button to customize the digit to match
your PBX system. When not connected to a PBX, the phone will only function
normally when set to “OFF.”
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
G. Changing the Flash Time
1. Press and hold the button to enter the menu.
2. Press the button to go to the FLASH TIME programming option.
3. Press the button to change the setting. “600” will begin flashing.
4. Press the SCROLL UP or DOWN button to select the desired dialing delay.
23
voice mail/menu
voice mail/menu
voice mail/menu
jkl 5
flash/edit
voice mail/menu
mno 6
save
save
voice mail/menu
flash/edit
flash/edit
prs 7