Filter
Top Products
Getting Started
8. Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
9. Place the BATTERY PACK inside the BATTERY COMPARTMENT.
10. Slide the HANDSET BATTERY
COMPARTMENT COVER firmly into
place in its closed position.
11. IMPORTANT: Before initial use, charge
the HANDSET for 12 hours.
12. TONE/PULSE Select Switch:
A. If your home is equipped with a tone
dialing system, set the TONE/PULSE
Select Switch to the TONE position.
B. If you have a rotary dialing system,
set the TONE/PULSE Select Switch
to the PULSE position.
C. If you are not sure which system you
have, set the TONE/PULSE Select
Switch to the TONE position. Press
the button on the HANDSET
to get a dial tone, and press any
button on the TELEPHONE KEYPAD
except the zero. If the dial tone
continues, it means that you do not
have TONE dialing service. Press
the button on the HANDSET
to hang up. Set the TONE/PULSE
Select Switch to the PULSE mode
and then try again.
13. Set the date and time on the HANDSET. (See page 22 for details.)
6
TALK
TALK
BASE UNIT
ANTENNA
120V WALL
OUTLET
AC ADAPTOR
TONE/PULSE
SELECT SWITCH
POWER-IN
CONNECTION
JACK
TELEPHONE LINE
CONNECTION
JACK
TELEPHONE
JACK
TELEPHONE LINE CORD
BASE UNIT
+
!
BATTERY PACK
BATTERY
CONNECTOR
BATTERY
COMPARTMENT
COVER